Welcome to your first recipe!

Start by clicking the Recipe Editor tab above so you can begin adding ingredients.

So, you have set up a Netgear WiFi range extender in your home to access a blazing-fast internet connection. But, what happened? Is your Netgear WiFi not working? If you nodded in yes, then no worries! By performing some workarounds, you will be able to get the issue fixed. In this article, you will get acquainted with the various troubleshooting tactics to resolve the issue at hand. So, let's get started. .

Fixed: Netgear WiFi Not Working Issue

1. Reboot the Extender

Did you try rebooting your Netgear WiFi extender? If not, then do it right away! Perhaps, your extender is struggling with technical glitches. Rebooting is the act of switching off your extender and turning it on back. If you still don't get a clear picture of what rebooting is, walk through the below-mentioned instructions to reboot your extender:

1. Press the Power button on your Netgear extender to switch it off.

2. Wait for a while and let your range extender rest.

3. Thereafter, press the Power button again in order to switch on your WiFi device.

And you're done with rebooting your Netgear extender. Now, check whether Netgear WiFi gets back to its normal working state or not.

2. Connect Your WiFi Devices Properly

Are your Netgear range extender and router placed too far? If the answer is yes, it is another big reason that has led you to the issue you're facing. So, minimize the distance between your WiFi devices and then check for the damages on the Ethernet cable connecting them.

If the Ethernet cable has any cuts, don't wait to replace it with a new one. And, the golden rule of a finger-tight connection remains the same.

3. Update the Firmware

Firmware Update helps your extender to deliver the best performance. Looks like your Netgear range extender is operating on an outdated firmware version. So, what are you waiting for? Access the Netgear Genie setup wizard and update your extender as soon as possible.

Don't know how to update the firmware of your Netgear range extender? Take the help of the below-listed instructions:

1. Open an updated web browser on your computer and access the Netgear extender login page.

2. Use the default username and password of your Netgear extender to log in to it.

3. As soon as you reach the Netgear Genie setup wizard, click the Settings tab, and navigate to the Maintenance section.

4. Look for the Firmware Update option, and click it to check if there is any new firmware version available for your WiFi device.

5. If a new firmware is available, follow the on-screen prompts and let your wireless extender get updated.

6. In this manner, you can update the firmware of your Netgear wireless extender and make it run again.

Note: If you own a Netgear router, you can update its firmware by accessing the Nighthawk router login page.

4. Relocate Your Netgear Extender

Where have you placed your Netgear extender? Near a fish tank? Well, it shouldn't be there. So, it is time to relocate your Netgear range extender. While deciding a new location for your WiFi device, make sure that the room is neat and clean. Apart from that, avoid placing your Netgear WiFi extender near objects carrying a large amount of water and the one with a metal coating.

Besides, keep tracking devices, radio-waves emitting devices, and reflexive surfaces away from your extender. Moreover, do not choose a corner to place your Netgear range extender.

5. Change the Wireless Channel

Your Netgear WiFi might also not work if it is operating on an overcrowded channel. Therefore, consider changing the wireless channel of your Netgear extender.

To change the extender's wireless channel, access the Netgear Genie setup wizard and change the Wireless Channel under the Settings menu. It is advised to select the least crowded wireless channel.

6. Reset Your Extender

If none of the aforementioned troubleshooting hacks bring you success, go for the factory default reset of your extender. Doing so will wipe the customized settings from your extender and resolve the issue you are currently facing.

For executing the reset process, ensure that your extender is getting a fluctuation-free power supply. Once assured, look for the Reset button, and press it using a pin-like object. Your range extender will get restored to the factory default mode. Now, perform Netgear WiFi extender setup from scratch by accessing mywifiext.net.

Sum Up

That's how to fix the Netgear WiFi not working issue with your extender. We hope that the aforementioned troubleshooting tactics will work in your favor, and you'll get success in resolving the issue.